What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 19.06.2025 08:29
What is lightning?
[image of Common-mode choke]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
When British people write X after everything, are they being serious or trying not to be awkward?
So, the voltage could go up to 500 volts, and the fuse will not open up.
It seems Mohan does not understand the difference between a comment and an Answer.
One is “what exactly is in a ‘surge protector’ ? ”
Why would my ex block me after I blocked him?
a photo is worth a thousand words.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Is a man over 50 not married no kids a red flag?
Upvotes:
At one ohm, the resistor has a maximum of 1 watt power.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
But… the neutral is now “floating” because of the 1 ohm resistance.
(Dc diagram shown, AC is similar).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Does turmeric help fight cancer? If so, how?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Why is the covert narcissist actively avoiding me when they see me everyday?
What does a fuse do?
2024–10–14 [Omar Gharbi Omar Gharbi ]
so, what happens?
Edit 2024–10.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–16 [ OO OLAOYE OYEBODE ]
He then asserts :
what exactly is a ‘surge’ protector?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Why, after a divorce, would one still want to ruin the other one’s life?
[old diagram got deleted by accident]
This is 'the assistant's answer'
There are three different concepts here that are getting confused.
Why do I want to give up on men?
eight
First Sentence:
Here is a simplified AC power diagram.
He then describes the function of a fuse.
I post the exact comment here.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
nine
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Because the load is inductive, the current lags the voltage.(by a bit).
Now when you have a certain ac resistance, then a current flows in a loop.
There are two important concepts here.
A circuit breaker is similar, but is resettable.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–10[John johnson John Johnson ]
The bolt then partially travels down the line to your home.
but I think this circuit , shows a few more pieces.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
An AC voltage/ current source, and an ac inductive load.
In schematic diagrams this is the symbol for a fuse:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
A fuse is a non-resetable over current circuit protector.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The third is lightning and “how it gets conducted into a home.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
One
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
He then describes Rainy Season and Lightning.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This device then solves the entire problem.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
but this device (an Inductor) … impedes the rapid changes in the current.
The other is “what does a “fuse” do?”
But it can get overloaded, and no longer works.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This is where the MOV conducts again, and dissipated the energy.
Barnstars:
the problem then depends on "how fast does the fuse operate?".
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
At least they know the answer if they wanted it.
It also is a device that limits the change in current flow.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This one hit behind the barn.
For this case there are devices called Metal oxide varistors (MOV).
These are simplified answers to the original question, and does not change anything I wrote above.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.